© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
NOTE:
This time will vary, and could be longer depending on size of machine
and under certain conditions.
● View mixing operation.
● For best results, off load mixed feed at as high RPM as possible, and with the
door as open as possible. The load must be fed off in high gear at high RPM, to
ensure even feed flow & clean out.
● Be sure all shields are in place before operation.
● Use common sense when operating.
The Minos Vertical Mixer-Feeder is designed and intended for processing and
mixing rations that include long stem forages. In most cases, the knives that
come standard on the mixer are placed to work well in most rations. However,
some rations may require moving knives to obtain the desired result.
Moving Knives to "In" or "Out" Position
Figure 14 – The positions on the knive.
The "Out" Position
on the knives (hole 1 & 3) will tend to move the long stem
hay and lighter bulky materials best in the early stages of processing and
mixing.
4.4- Knife Adjustment
(only for implements driven by a P.T.O Shaft)
39
