© Copyright
MINOS DIS TICARET LIMITED SIRKETI., 2017. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI.
Document No: T-DYKM 1,5-2.2018_I.O.M./ Tarih: 09.07.2018
shortened by 200 mm, but when the two halves are put back together this
becomes 100 mm!)
(Figure 10.a, 10.b and 10.c.)
Figure 10.a Figure 10.b
Figure 10.c- The shortening of the PTO shaft.
● File away the end of the tube, remove the remaining of filing and lubricate
gliding spots well.
● Ensure the closed and extended length of the guard and the drive shaft are
right for the tractor and machine. The guard tubes should be slightly shorter
than the appropriate drive shaft telescopic halves by not more than 25 mm, so
that they will not separate at its longest length or ‘bottom’ at its shortest.
● Ensure the guard’s bearings are secure in the correct position on the drive
shaft grooves, and a restraining device, eg a rope or chain, is in place to prevent
the guard rotating with the shaft.
26
