Minebea Intec PR 5220 Series, Instrument Manual

Page: 209 / 235

Bytes 0 63
Name Type of data Function
Byte 3 Material ID BYTE Value range: 1 10
Byte 4 7
Set point DINT/REAL Weight
Byte 8 11 Preset DINT/REAL Preset point for switching from coarse flow
to fine flow.
Byte 12 15
Material overshoot (OVS) DINT/REAL Weight
Byte 16 19
Calming time DINT [ms]
Byte 20 23
Tolerance above set point DINT/REAL Weight
Byte 24 27
Tolerance below set point DINT/REAL Weight
12.3.5.2 Read window EasyFill → PLC
The data required for monitoring and controlling filling does not fit in a 64-byte write
window. For this reason the system differentiates between system and material
parameters. The value of the first byte can be used to determine whether the data refers
to the system or the material.
12.3.5.2.1 System data
Before starting filling, a check must be carried out to ensure that the system is ready
(byte 3: bit 2).
The Dosing_Run bit is set once filling has successfully started.
Bytes 0 63
Name Type of data Function
Byte 0 TableSelect USINT Content of read data:
0 = system data, 1 = material data
Byte 1
Bit 0: MSB Bit 0: ADC error
Bit 1: above max. + still permis-
sible range (OVL)
Bit 2: above max. (FSD)
Bit 3: below zero
Bit 4: zero ±¼ d
Bit 5: within zero set range (ZSR)
Bit 6: weight is stable
Bit 7: weight above max. (FSD)
and below overload BOOL
Transmitter Series PR 5220 12 Fieldbus interface
Minebea Intec EN-206