7.15.2
Operating parameters
The operating parameters are set under this menu item.
Open the menu via
-[Operating parameter].
The selected interface is displayed.
3.
Press the [Param] softkey to set the parameters.
The following window opens:
4. Select [Baudrate] and confirm.
A selection window opens.
5.
Select the desired transmission speed and confirm.
6. Select [Stopbits] and confirm.
A selection window opens.
7.
Select the desired stopbit and confirm.
8. Press
two times to exit the menu and save.
Transmitter Series PR 5220
7 Commissioning
Minebea Intec
EN-130
Summary of Contents for PR 5220 Series
Page 234: ......