Minebea Intec PR 5220 Series, Instrument Manual

Page: 219 / 235

SPM address Type of data R/W Function
D67 DINT R EasyFill only: "Last_Error" error, see Chapter 16.6.2
OPC server only
R264 REAL R Gross value (as float)
R265 REAL R Net value (as float)
R266 REAL R Tare value (as float)
R267 REAL R Current gross/net selected by X72 (as float)
R270 REAL R Max. value from scale (FSD) (as float)
R271 REAL R Min. value from scale (as float)
R272 REAL R Report: Gross value (as float)
R273 REAL R Report: Net value (as float)
R274 REAL R Report: Tare value (as float)
R280 REAL R Standard application only: Limit: Limit 1 on (as float)
R281 REAL R Standard application only: Limit: Limit 1 off (as float)
R282 REAL R Standard application only: Limit: Limit 2 on (as float)
R283 REAL R Standard application only: Limit: Limit 2 off (as float)
R284 REAL R Standard application only: Limit: Limit 3 on (as float)
R285 REAL R Standard application only: Limit: Limit 3 off (as float)
R287 REAL R/W Write the value in the preset tare memory (as float).
L17
X1088 1151
LWORD
BOOL
W
R SPM out
Output
L18
X1152 1215
LWORD
BOOL
W
R SPM out AND coarse
Output and coarse
L19
X1216 1279
LWORD
BOOL
W
R SPM out AND fine
Output and fine
Note:
The system variables (e.g.: ST_WGT_A) for the communication via OPC are described in the operating
instructions PR 1792 (Chapters 4 + 5).
Example:
Production start
Write material parameters (D44 D49).
Start filling (X1168).
Monitor status (B144, B145).
Read report data when filling is complete.
Transmitter Series PR 5220 13 SPM
Minebea Intec EN-216