Mindray HyBase 8300, Operator'S Manual

Page: 97 / 176

4-1
4
Cleaning and Disinfection
4.1 General
The product must be cleaned and wipe or spray disinfected after every use.

Remove the mains plug from the socket before cleaning/disinfection.

Liquid should never be allowed to enter live parts.

It is strictly advised to observe the manufacturer instructions regarding how
to use the detergents and disinfectants as well as the valid hospital hygiene
rules.

Always wear gloves for cleaning and disinfection, otherwise it can cause
infection.

Be sure to strictly follow the recommended cleaning/disinfecting methods
to clean/disinfect the operating table.

Do not use the cleaning agents or disinfectants containing alcohol where
such medical devices as electrosurgical units, defibrillators or defibrillator
monitors can be used. Otherwise, it can cause fire and/or explosion
hazards.

Particles of grime may become encapsulated and lead to the product not
reaching the desired germ-reduction after disinfection. Before disinfection,
the product must be cleaned thoroughly of contamination and encapsulated
particles of grime and then be dried.

Do not clean/disinfect the operating table mechanically.

Improper cleaning/disinfection can damage the operating table.

Use proper amount of the cleaning agent to clean the operating table, and
remove any excessive agent and/or liquid by a dry cloth.

Perform visual and functional inspections after each cleaning and
disinfection process.