Mindray HyBase 8300, Operator'S Manual

Page: 47 / 176

Daily Operations
2-19
13. Press and hold to obtain the reverse trendelenburg position (foot down).
14. Press and hold to longitudinally slide the table top toward the foot end.
15. Press and hold to longitudinally slide the table top toward the head end.
16. Press or to obtain the normal position or reverse position.

After adjusting the operating table, be sure to switch off the hand control.

Each time before using the operating table, check all functions by pressing
every functional key for 2 to 3 seconds. Make sure all the keys can work
normally. Do not use the damaged operating table.

When adjusting the operating table, make sure the cord of the hand control
is not jammed by the joints.

When the corded hand control has been idle for about 90 seconds, it will be
switched off automatically.

If the table top is sloped (trendelenburg position) by more than 10
º
, it cannot
slide toward the head end.