Mindray HyBase 8300, Operator'S Manual

Page: 129 / 176

Anesthesia Frame
8-7
8.4.3 Installation and Use
8.4.3.1 Inspection before Use
The anesthesia frame is maintenance-free. However, wear due to use and aging can
compromise its functionality and safety. Check it carefully each time before use. Do not use it
if you see any sign of wear or damage.

Be sure to check the anesthesia frame each time before use. Do not use the
worn or damaged anesthesia frame.
8.4.3.2 Installation and Use
1. Slide the clamp housing onto the side rail of the operating table.
2. Tighten the locking screw to lock the clamp.
3. Insert the vertical pole of the anesthesia frame into the opening of the clamp.
4. Adjust the vertical pole to a suitable height.
5. Tighten the locking handle to lock the anesthesia frame.
6. Hang the surgical sheet on the horizontal pole of the anesthesia frame.
7. Make sure both the clamp and the anesthesia frame are reliably installed.

Only the light square clamp match the vertical pole of the heavy anesthesia
frame. Do not use other clamps. Otherwise, it can cause personal injury
and/or property damage.

Make sure the clamp is tightly locked on the side rail and positioned upright.
Otherwise, the anesthesia frame can fall and cause personal injury and/or
property damage.

Make sure the anesthesia frame is tightly fixed by the locking handle and
positioned upright. Otherwise, the anesthesia frame can fall and cause
personal injury and/or property damage.