Mindray HyBase 8300, Operator'S Manual

Page: 62 / 176

Daily Operations
2-34
14. Press and hold to longitudinally slide the table top toward the foot end.
15. Press and hold to longitudinally slide the table top toward the head end.
16. Press or to obtain the normal position or reverse position.

After adjusting the operating table, be sure to switch off the hand control.

Each time before using the operating table, check all functions by pressing
every functional key for 2 to 3 seconds. Make sure all the keys can work
normally. Do not use the damaged operating table.

If the operating table does not respond to the command even though the
function key is completely depressed, either re-aim the hand control or
move to a slightly different transmission position. In such cases the infrared
receiver at the column is being blocked by a person’s body.

When the IR remote control with LCD has been idle for about 90 seconds, it
will be switched off automatically.

If the table top is sloped (trendelenburg position) by more than 10
º
, it cannot
slide toward the head end.

10 minutes after the first low battery alarm, the operating table will power off
automatically.

It takes about 10 hours to fully charge the battery.

It is recommended that the IR remote control with LCD be slid into the
mobile charging station if it is idle.