Mindray HyBase 8300, Operator'S Manual

Page: 78 / 176

Daily Operations
2-50
this limit.

If accessories are used, make sure the weights of the accessories installed
on the dual-joint leg plate and of the patient’s leg add up no more than 35 kg.

When adjusting the patient’s body position, do not reach beneath the table
top or touch the moving parts. Otherwise, you can be pinched.

When tilting or sloping the table top or when adjusting the leg plate ensure
that the table top does not collide with the column or the operating table
base.

Make sure that the dual-joint leg plates are not crossed /on top of each other
before adjusting the leg plates for the horizontal position. Otherwise, it can
cause personal injury and/or property damage.

Each time before using the pad, check it carefully. Do not use the worn or
damaged pad.

Be sure to use the pad provided by Nanjing Mindray only.
2.5.3.1 Removing Dual-joint Leg Plate
1. As Figure 2-40 (A) shows, hold the dual-joint leg plate with one hand, and press the
locking button with the thumb.
2. As Figure 2-40 (B) shows, lift and pull out the dual-joint leg plate.
A
B
Figure 2-40 Removing the dual-joint leg plate
Button