Accutorr V Operating Instructions
3 - 25
Operation
Common Setup
4.
Once the desired value is displayed, press
(18) to set it
5.
Repeat steps 1 through 4 as needed.
6.
Once the contrast or brightness values are set, either:
•
(12) to exit the COMMON SETUP dialog.
• Set the alarm, key, or pulse volume (refer to Section 3.10.1).
NOTE:
Any changes made to LCD BRIGHT and LCD CONTRAST
remain when the monitor is turned off and then on again.
NOTE:
There is no setting item “LCD CONTRAST” on the color LCD
display.