Accutorr V Operating Instructions
3 - 3
Operation
Setting-up and Turning Power On
FIGURE 3-1
Example LCD Display (17)
5.
Optional – To set the time and date, refer to section 3.14 for instructions.
6.
Optional – To adjust the contrast on the LCD, refer to section 3.10.2, “Setting the LCD
Brightness and Contrast”.
7.
Test the recorder by pressing
(33). The recorder prints a real time waveform to
verify proper function.
8.
If the optional Temperature module kit is installed, test the predictive thermometer by
removing the probe from its holder.
9.
Verify that the message “Temp Warming Up” displays, followed by the message
“Predictive Temp Ready” and a double beep.
Patient ID
Patient Size
Date and Time
Message Area
