MIMAKI JV5-320S, Operation Manual

Page: 72 / 312

2 Before Use
2-36
NCU functions
Function name Sub function Setting value Function
NOZZLE CHECK (p. 6-27) ON, OFF Set whether or not to perform nozzle
missing detection.
NG ACTION (*1)
[DURING THE
DRAW]
(p. 6-27)
CONTINUE Set the operation of the printer to be
performed during printing in case a
certain level of nozzle missing is
detected and thus
NG judgment is
made. (*2)
CLEAN-
ING&CONT CLEANING
TYPE NORMAL, SOFT, HARD
CLEAN-
ING&STOP CLEANING
TYPE NORMAL, SOFT, HARD
RETRY COUNT 0 to 3
STOP
NG ACTION (*1)
[AFTERthe-
DRAWend]
(p. 6-
28)
CONTINUE Set the operation of the printer to be
performed after completion of print-
ing of one file in case a certain level
of nozzle missing is detected and
thus
NG judgment is made. (*2)
CLEAN-
ING&CONT CLEANING
TYPE NORMAL, SOFT, HARD
CLEAN-
ING&STOP CLEANING
TYPE NORMAL, SOFT, HARD
RETRY COUNT 0 to 3
STOP
NG JUDGEMENT
(*1) (p. 6-28)
CLOGG NZL/color 1 to 180 Set the number of missing nozzles
per row for judging the nozzle check
NG . (*2)
CLOGG NZL/ALL 1 to 180 Set the total number of missing noz-
zles for judging the nozzle check
NG . (*2)
COND.INDICATION (p. 6-28) Displays the status of the NCU.
Pressing [FUNCTION] key, it dis-
plays every error that has occurred
in the NCU and between NCU
↔
Main Unit.
Using the [

] or [

] key, the errors
can be displayed one by one in the
order of occurrence.

NG (*1): Bad nozzle condition.

NG (*2): One or more bad nozzles have been located on print head.