MIMAKI JV5-320S, Operation Manual

Page: 236 / 312

6 Operation for Functions
6-2
Functions Invoked by [FUNCTION] Key
The following five types of functions can be invoked by pressing the [FUNCTION] key.
Invoking SET UP functions
Registering printing conditions in a lump (type registration)
FUNCTION mode provides 17 setup functions. (In the case of usage, it is 18 items about dedicated subli-
mation transfer ink.)
The setting value of each of the 16 functions other than SETUP RESET can be registered as any of the fol-
lowing four types. (In the case of usage, it is 17 items about dedicated sublimation transfer ink.)
If the types are registered for different kinds of media, respectively, printing conditions can be easily
changed when the media is replaced with another kind of media.
Example of type registration
List of functions
This section describes briefly the setup functions and their setting values.
Function name Description Refer to
SET UP Make various settings concerning print quality. p. 6-2
MAINTENANCE
Maintenance functions are to be executed to keep the printer in good condi-
tion.
p. 6-13
MACHINE SETUP Display various information of the printer or set time or units of measure.
p. 6-17
NCU Set operations concerning the nozzle missing detection function. p. 6-26
DISPLAY Set a language to be used with the printer.
p. 6-29
When solvent ink is used.
Type 1 For Tarpaulin 1
Type 2 For Tarpaulin 2
Type 3 FF (Flexible Face)
Type 4 PVC
Name Function Refer to
MEDIA COMP. Corrects the feed rate of media
p. 6-4
MediaFeed SETUP Set particulars related to media feed. p. 6-4
HEATER Sets heater conditions p. 6-4
PRINT MODE Sets a print quality level and printing direction p. 6-5
INK LAYERS Sets the number of layers in which ink is to be applied p. 6-7
DRYING TIME Sets the time to wait for ink drying p. 6-7
AUTO CUT Cuts the media automatically after printing p. 6-8
PRE-FEED Feeds the media back and forth before printing
p. 6-8