MIMAKI JV5-320S, Operation Manual

Page: 230 / 312

5 In Case of Trouble
5-22
∗∗∗∗∗ ERROR 51 ∗∗∗∗∗
Y-ORIGIN
Y-origin could not be detected. Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗
ERROR 53
∗∗∗∗∗
HEAD HEIGHT ORIGIN
Head height origin could not be
detected.
∗∗∗∗∗
ERROR 54
∗∗∗∗∗
MEDIA JAM
Paper jam was detected. Open the front cover and raise the
clamp lever, and remove the jammed
paper.
If the same error message appears
again even after clearing the paper jam
status, contact your local distributor to
call for service.
∗∗∗∗∗
ERROR 58
∗∗∗∗∗
POSITION ENCODER:DIR
An error occurred in the control sys-
tem. Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗
ERROR 58
∗∗∗∗∗
POSITION ENCODER:CNT
An error occurred in the control sys-
tem.
∗∗∗∗∗
ERROR 59
∗∗∗∗∗
CUTTER ENCODER
An error occurred in the control sys-
tem.
∗∗∗∗∗ ERROR 64 ∗∗∗∗∗
TAKE-UP VOLTAGE
An error occurred in the heavy-duty
take-up device control system.
∗∗∗∗∗
ERROR 64
∗∗∗∗∗
FEEDER VOLTAGE
An error occurred in the heavy-duty
feeding device control system.
∗∗∗∗∗ ERROR 64 ∗∗∗∗∗
TAKE-UP VOLTAGE (small)
An error occurred in the small take-up
device control system. Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗
ERROR 65
∗∗∗∗∗
TAKE-UP TENSION-BAR
An error occurred in the heavy-duty
take-up device control system.
∗∗∗∗∗ ERROR 66 ∗∗∗∗∗
FEEDER TENSION-BAR
An error occurred in the heavy-duty
feeding device control system.
∗∗∗∗∗
ERROR 67
∗∗∗∗∗
TAKE-UP UNIT 00
Not connected with heavy-duty take-
up device. Check the connection of heavy-duty
take-up device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
TAKE-UP UNIT 01
Wrongly connected with heavy-duty
take-up device.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
TAKE-UP UNIT 04
An error occurred in the heavy-duty
take-up device. Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗
ERROR 67
∗∗∗∗∗
FEEDER UNIT 00
Not connected with heavy-duty feed-
ing device. Check the connection of heavy-duty
feeding device.
∗∗∗∗∗
ERROR 67
∗∗∗∗∗
FEEDER UNIT 01
Wrongly connected with heavy-duty
feeding device.
∗∗∗∗∗
ERROR 67
∗∗∗∗∗
FEEDER UNIT 04
An error occurred in the heavy-duty
feeding device. Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗∗ ERROR 67 ∗∗∗∗∗
Small TAKE-UP UNIT
Wrongly connected with small take-up
device. Check the connection of small take-up
device.
Error message Cause Remedy