MIMAKI JV5-320S, Operation Manual

Page: 101 / 312

3-29
Setting the media on the printer
5
Pull out the media to the front, and put the start of the media on the paper core with
tape.
1.Holding the center of the media, pull it out until the start of it comes to the paper core.
2.Put the start of the media on the paper core with adhesive tape. To prevent wrinkle, pulling the media, put
some adhesive tapes in order of the number of figure below.
6
Push the front clamp lever down.
7
Hold the both ends of the media with the media press lightly, not to be lifted the
media.
Take care not to come the media out of the right end pinch roller.

Media loosening and wrinkle may degrade print quality.
When putting tapes, pull the media to the direction shown below to remove
wrinkle.

Do not push the media press to the end. Set lightly.

When using a thick media, remove the media press from the media before
printing.
1 3 2
Media Press