MIMAKI JV5-320S, Operation Manual

Page: 201 / 312

4-53
Maintenance when using sublimation transfer ink
Changing the time for issuing warning of flushing Box filter replacement.
[FILTER EXC. LV.]
When you use the sublimation transfer ink, the filter on the flushing BOX could be stained, depending on
the use environment and working conditions, earlier than the standard time for replacement. This function
makes it possible to accelerate the time for replacement of the filter earlier than the standard.

The replacement level can be set in 5 stages (From level 5/5 to 1/5).

At level 5/5, the warning is issued at the standard time.

At level 1/5, the warning is issued around twice earlier than the standard time.

Change the level checking the status of the stains on the filter.
STEPS:
1
Make sure that the printer is in LOCAL mode, and then select [MAINTENANCE] using
the [FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2
Select [
FLUSHING BOX
] by pressing the [

] key and press the [ENTER] key.
3
Select [FILTER EXC. LV.] by pressing the [

] key and press the [ENTER] key.
(When the warning for flushing BOX cleaning or error has not been issued.)
(When the warning for flushing BOX cleaning or error has been issued.)

When you use the sublimation transfer ink, the replacement of the flushing
BOX filter is notified by messages.
When the time for replacement of
the filter is approaching:

It is recommended to replace the filter
promptly.
When the time for replacement has
been reached:

Replace the filter immediately.
L.
∗
> [JV5-01]
! NearExcg. Fbox FILTER
∗∗∗∗
ERROR 145
∗∗∗∗
F.BOX FILTER EXCHG.
L.
∗
> [JV5-01]
width :
∗∗∗∗
mm
FUNCTION
MAINTENANCE
<ENT>
3
times
FUNCTION
ST. MAINTENANCE
<ENT>
FUNCTION
FLUSHING BOX
<ENT>
1
times
FLUSHING BOX
BOX EXCHANGE LV
<ENT>
FLUSHING BOX
FILTER EXC. LV.
<ENT>
2
times
FLUSHING BOX
CLEANING COMP.
<ENT>
FLUSHING BOX
FILTER EXC. LV.
<ENT>