MIMAKI JV5-320S, Operation Manual

Page: 53 / 312

2-17
Operation Panel
Display
Each setting or message displayed on the LCDs is enclosed in [ ], like [TYPE 1], [PLEASE WAIT], etc. in
the text of this manual.
The operation keys are shown enclosed in brackets [ ].
[

] indicates that the down JOG key is to be pressed.
The name of any other operation key is shown enclosed in brackets [ ], like [FUNCTION].
How to read the display
The LCDs give information as shown below depending on the status of the printer.
Ready for printing status
Display 1 :
Shows the temperatures of the heaters inside the printer.
Display 2 :
The indication in the upper left area shows the mode of the printer. The sample display above shows
LOCAL mode.
(See 2-22)
The indication in the upper right area shows the machine name assigned to this printer. (Refer to
?MACHINE NAME (p.6-23)? )
The indication in the lower right area shows the width of the media detected by the printer.
Function menu indicating status
Display 1 :
The temperatures of the heaters are kept displayed until the top level of the menu hierarchy or the [SET
UP] function is selected. There may be a case where nothing is displayed, depending on the selected
item; this does not mean a malfunction of the display.
Display 2 :
The indication in the upper area shows the selected item.
The indication in the lower left area shows the job name or the like.
The indication such as <ent>, if any in the lower right area, means that you are asked whether or not to
select the displayed job or that there is a lower level of hierarchy.
For the operation of function menus, refer to “Outline of menu hierarchy”
(See 2-26) .
Display 1
Display 2
PRE PRT POST
OFF OFF OFF
L.
∗
> [JV5-01]
width : ∗∗∗∗ mm
MAINTENANCE
HD.MAINTENANCE
<ent>
Display 1
Display 2