MIMAKI JV300-130 A Maintenance Manual Download Page 188

Page: 188 / 244

6.4.11

P.1

6.4.11 Drying Fan Assy.



Work procedures

1. Remove the connector.
2. Push up the stoppers at bottom of the cover, and then remove

the Assy. together with cover.

Reverse the disassembly procedure for reassembly.

Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.

Drying fan Assy x5(160 size), x4(130 size)

Connector

Push stoppers

When attaching, push down the stopper and fix the
Assy. It is not fixed only by having fitted it.

R.1.0

MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Drying Fan Assy.

Model

JV300-130/160

Issued 2014.05.30 Revised

F/W ver

1.00

Remark

1.0

Rev.

Summary of Contents for JV300-130 A





















































































































































































































































Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands

MIMAKI JV300-130 A, Maintenance Manual

Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands