MIMAKI JV300-130 A Maintenance Manual Download Page 48

Page: 48 / 244

3.1.5

P.1

R.1.0

MAINTENANCE MANUAL > Workflow > Ink Related Parts > Replacement of the Cutter Assy

Model

JV300-130/160

Issued 2014.05.30 Revised

F/W ver.

1.00

Remark

1.0

Rev.

3.1.5 Replacement of the Cutter Assy



List of replacement procedures

Item

Work operation

Description

Ref.

Covers



Removal of covers, etc.

Remove the Front cover M, L.

6.1.1

Cutter Unit



Remove the cutter unit.

6.2.11



Mounting of the cutter unit.

Mount the cutter unit.
For replacement cutter blade : SPA-107 Cutter blade
Assy.

Adjustment



Adjustment of cutter position

Adjust the back and forth position of the cutter Assy.

6.1.1

Covers



Mounting of the covers.

Mount the covers that have been removed.

6.1.1

Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.

Cutter Unit

Summary of Contents for JV300-130 A





















































































































































































































































Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands

MIMAKI JV300-130 A, Maintenance Manual

Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands