MIMAKI JV300-130 A, Maintenance Manual

Page: 55 / 244

© 2014 MIMAKI ENGINEERING CO.,LTD. 3.2.4 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Driving Parts > Replacement of the Linear Encoder Scale
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
3.2.4 Replacement of the Linear Encoder Scale
 List of replacement procedures
Item Work operation Description Ref.
Covers
1.
 Removal of covers, etc. Remove the Front cover M, L, Front undercover and car-
riage cover. 6.1.1
Linear
Encoder Scale
2.
 Removal of the linear encoder scale. Remove the linear encoder scale. 6.3.5
3.
 Removal of the protective film Peel off the protective film from the encoder.
4.
 Mounting of the linear encoder
scale. Mount the linear encoder scale.
Pay attention to the location of the encoder PCB assy.
Check
5.
 Encoder check Carry out the encoder check to confirm it functions
normally. 4.3.6
5.1.12
Covers
6.
 Mounting of the covers. Mount the covers that have been removed. 6.1.1
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Linear Encoder Scale