Millipore Integritest Exacta Operating And Maintenance Manual Download Page 245

Page: 245 / 284

Millipore System Documentation Set

246

Operating and Maintenance Manual

Publication XITXSP121 P Rev.A

Figure 84: Caution Label

Safety and Electromagnetic Compliance

•

The Integritest Exacta instrument, fully configured with all accessories, meets the

requirements of the EMC Directive 89/336/CEE and Low Voltage (safety) directive

72/23/EEC.

•

This Class B digital apparatus meets all requirements of the Canadian Interference—

Causing Equipment Regulations.

•

Cet appareil numérique de la class B respecte toutes les exigences du Reglement sur le

matériel brouilleur du Canada.

•

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may

cause undesired operation.

Note:

See the Declaration of Conformity (supplied with the Exacta instrument) for

additional compliance information.

Summary of Contents for Integritest Exacta





























































































































































































































































































Search results

Summary of Contents for Integritest Exacta

Reviews:

Brands by name

Popular brands

Millipore Integritest Exacta, Operating And Maintenance Manual

Search results

Summary of Contents for Integritest Exacta

Reviews:

Brands by name

Popular brands