manualshive.com logo in svg

Millipore Integritest Exacta, Operating And Maintenance Manual

Share
Download
Millipore Integritest Exacta Operating And Maintenance Manual Download Page 120

Integritest

 Exacta Filter Integrity Test Instrument 

Operating and Maintenance Manual 

Test Editor       

121

 

 

Figure 48: Test Details Screen - F4: Specifications 

12.

 

Modify the Test Time (optional). 

13.

 

Click 

 if you wish to cancel the changes.  

14.

 

Or click 

 to save the changes. 

15.

 

The revision information is automatically updated when a test is saved. 

Note:  

If more information is required about a specific filter, click 

 to view the filter 

specifications from the Filter Editor. 

Modify an Existing Test 

A user may modify specific entries for an existing test. 

1.

 

Use the pull-down menu to select an existing test.  

 

  

 

Summary of Contents for Integritest Exacta





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands