Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 141 / 158

135
Hydraulic Systems
IMPORTANT: There are three different sys-
tems on the bagger. Each system uses a
different type of oil. Never mix oils in the
systems. Refer to the proper system for rec-
ommendations.
They are:
Main Hydraulic System:
Type of Oil: ISO 68 Hydraulic Oil
Reservoir Capacity: 95 Gallons
Clutch Hydraulic System:
Type of Oil: Mobil 424
Reservoir Capacity: 20 Gallons
Rotor and Feed Table Planetary Drive:
Type of Oil: Synthetic 80W-140 Gear Lube
Rotor Planetary System Capacity: 7.5 Gallons
Feed Table Planetary Capacity: 1.25 Pints
WARNING
•
Avoid high pressure fluids.
•
Avoid the hazard by relieving all
hydraulic pressure from the system
before disconnecting any lines or
fittings. Tighten all connections
before applying any pressure.
•
Search for hydraulic oil leaks with
a piece of cardboard. Protect your
hands and body from high pressure
fluids.
Hydraulic System Cleanliness
Important: The greatest contributor to hy-
draulic component failure is contamination
of the oil with dirt and other debris. Keep
all hydraulic access areas completely clean,
such as around the hydraulic filter and filler
cap. Immediately repair any fittings, hoses
or other components where leakage is ob-
served. Wipe up any leakage.
If the hydraulic system should be disconnected
for service, protect the ends of hoses, tubing
and ports of components from contamination
with clean lint free towels or clean plastic bags,
plugs or caps.
Before installing any replacement hose , flush the
inside of the hose with clean diesel fuel or un-
used commercial petroleum cleaning solvent for
ten seconds minimum. Do not use water, water
soluble cleaners or compressed air.