Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 18 / 158

12
Electrical Safety Precautions
•
This machine and its systems are designed to operate off of a 12 volt DC power supply
only.
•
Never operate this machine with a damaged electrical system. Disconnect from electrical
supply if machine is not working properly.
•
Do not attempt to operate this machine without the appropriate fuses, relays and breakers
in place.
•
Do not attempt to bypass a fuse. If a fuse is no longer serviceable, a shock or short haz-
ard may exist.
•
Never replace original fuses/breakers with higher amperage fuses/breakers.
•
Inspect all components for damage after any electrical problem.
There are additional hazards associated with the service and maintenance of electrical components.
•
All electrical components generate heat. To avoid serious burns, never touch internal
components immediately after use.
•
Disassembly or attempted repairs, if accomplished incorrectly can create electrical shock
and/or short hazards.
Only qualified personnel should perform repair service.
•
Never attempt to replace electrical wires and cables with smaller gauge wire and cable.
•
Some electrical components can store energy after the unit is shut down. Be sure to com-
pletely de-energize all electrical components, discharging all stored energy before begin-
ning any service work.