Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 78 / 158

72
Seal Beginning End Of Bag
1. Pull enough bag to apply the seal. Pull
from the inside folds, not the outside folds
(white on the outside, black on the inside).
Make sure you pull the bag under the bag
bungee cord.
2. Seal the end of the bag using one of the
two following methods:
a. Using the Master Seal ® . Follow the
instructions that are included with the
Master Seal. Master seal and tool
(Zip Tool Part Number 42.1500273)
are available from your Miller Ag-Bag
dealer.
42.1500272 - 250 Ft. Roll
3. Slide the excess bag back onto the tunnel
and bag pan. Position the knot approxi-
mately knee high.
b. Use a double knot tie. Find the end of
the bag, gather the bag to the center.
Twist the bag tight and tie the bag tight.
Leave enough bag to fold over and tie
a second time giving the bag an air
tight seal.
Master Seal Tool
Master Seal
First Tie
Fold Over & Tie Again
Knot At Beginning Of Bag
(Photo is for knot placement only - stretch
bars must be at 1 or 3 o’clock not as shown)