Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 74 / 158

68
Bag Identification
Remember to use only Ag-Bag
®
bags. They are
designed to fit and function properly.
Locate the bag size indicated on the box. Make
sure you are using the correct size for your bag-
ger.
Locate the arrow on the side of the box. It
should be pointing toward the bagger.
IMPORTANT: Be sure to select the best
surface for bag placement. Refer to bagging
surface in the “Bagging Instructions” section
of this manual.
Bag Identification
Arrow
Bag Size
Remove Anchors From Storage
Hooks
Before placing the bag onto the tunnel, the two
anchors have to be removed from the storage
hooks.
1. Remove the clips and pins holding the
cable guides in the up position. Store pins
inside cab while bagging.
2. Remove the clips from the welded pin and
lower the guides down. Secure in the low-
ered position with the clips.
3. Remove the anchors from the hooks and
position in front of the tunnel.
4. Repeat for the other anchor.
Anchor and Guide In Storage Position
Pin & Clip
Clip On
Welded Pin
Cable Guide
Anchor