Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 41 / 158

35
Ignition Switch
The ignition switch is located on the right side
cab post. Turn the key from the OFF position,
past the RUN position to the START position
to crank the engine. Once the engine starts,
release the key and it will return to the RUN
position.
Remove the key from the ignition switch when-
ever leaving the vehicle unattended.
Turn the ignition switch to the ACCESSORY
position to operate any switched accessories
such as radios, etc. without having the engine
running.
Ignition Switch
Ignition Switch
Parking Brake
The parking brake control is a pull to apply, push
to release control. It is located on the right side
corner post of the cab above the system pres-
sure gauge and the ignition switch.
Pull the yellow control out to apply the parking
brake. The parking brake is set with the ab-
sence of air pressure.
Push the yellow control knob in to release the
parking brake. The parking brake requires air
pressure to release.
Always apply the parking brake before leaving
the cab or leaving the vehicle unattended.
When the parking brake is applied, the parking
brake icon will be displayed until the parking
brake is released.
Park Brake Control
Park Brake
Control Knob
Parking Brake Icon