Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 138 / 158

132
NOTE: Never operate the engine without an air
cleaner. Intake air m ust be filtered to prevent
dirt and debris from entering the engine and
causing premature wear.
After servicing is complete, reinstall cover onto
the cannister.
Clip the cover in place with the six clips to hold
the cover in position on the cannister.
Periodically check the vacuator valve on the air
cleaner cannister to make sure it is closing and
sealing when the engine is running. If the vacu-
ator valve does not close and seal properly it
must be replaced.
Reset the restriction indicator after the filters are
replaced. Press the yellow button on the indica-
tor to reset.
Air Cleaner Vacuator Valve
Vacuator Valve
Air Cleaner Restriction Indicator
Restriction Indicator
Reset Button
Engine Serpentine Belts
To access the engine serpentine belts, remove
the bolt holding the top of the guard to the en-
gine. Swing the guard down to access the belts.
Be sure to swing the guard up and bolt in place
before operating the bagger.
WARNING
Do not operate the bagger unless all guards
and covers are secured in place or closed.
Moving parts inside could cause serious
injury or death.
Serpentine Belt Guard
Serpentine Belt Guard Top Bolt
Serpentine
Belt Guard
Serpentine
Belt Guard
Top Bolt