Miller AG-BAG Professional LX1214, Operator'S Manual

Page: 30 / 158

24
Engine Throttle Control Switch
Location (G)
The engine throttle control switch is a three
position (momentary) switch which must be held
in position. When the switch is released, it will
return to the center (off) position.
Push and hold the top of the switch in to in-
crease the engine speed.
Push and hold the bottom of the switch in to
decrease the engine speed.
When the switch is released it will return to the
center position and will maintain the engine
speed it was running at when the switch was
released.
Engine Throttle Switch
Engine Throttle Switch
Engine High Idle Switch
Location (H)
The engine high idle switch is a two position on/
off switch.
Push the top of the switch in to increase the
engine speed immediately up to 1850 rpm.
Push the bottom of the switch in to decrease the
engine speed immediately to around 1000 rpm
or whatever engine speed the engine throttle
control was set at.
Engine High Idle Switch
Engine High Idle Switch
The engine high idle speed is set to 1850 rpm
from the factory. This speed can be set to any
value between 1700 rpm and 2100 rpm. Refer
to “Setting High Idle Speed” in the “Adjustment”
section of this manual.