131
Engine Air Cleaner Filters
Perform the following procedures at 250
Hour or 3 Month Intervals
Inspect the filters twice weekly if operating in
dusty conditions. Inspect daily if operating
conditions are severe.
The air cleaner is mounted on the top side of the
engine.
Use the following procedure to replace the
filters.
1.
Open the six clips around the cover to
remove the cover.
2.
Pull the primary filter assembly out of the
cannister.
3.
Do not remove the inner (secondary) filter
unless it is to be replaced.
4.
With the secondary filter in place, use a
rag to wipe the inside of the filter cannister
and cover clean.
5.
If the secondary filter is being replaced,
replace it after the cannister has been
cleaned.
6.
Check the primary filter for any damage
and replace if any is discovered. Do not
clean the primary filter, always replace the
filter when the System Monitor indicates air
filter is clogged.
Air Cleaner
Primary Filter
Inner (Secondary) Filter
System Monitor Air Cleaner Alarm
Summary of Contents for AG-BAG Professional LX1214
