Milestone 372700, Operator'S Manual

Page: 76 / 108

MacroVIEW MM179-001 - Operator Manual
76
IT IS NOT POSSIBLE TO CHANGE THE CASE NAME AFTER ITS CREATION.
E. Live at start. Used to go directly to LIVE when the software starts.
F. Audio rec. By default, up to 15-minute audio recordings can be made. You can change this value up to
a maximum of 30 minutes per recording.
G. Video rec. By default, up to 15-minute video recordings can be made. You can change this value up to a
maximum of 30 minutes per recording.
H. Cam standby after. It is the time (in seconds) after which the camera goes to standby mode. This
feature increases the camera’s lifetime. By default, it is set to 1 hour and you can set it to 1 minute but
you cannot disable it.
I. Reset video recording options: function not available.
J. Cam standby after. Matches the time (in seconds) after which the camera goes to standby mode. This
feature increases the camera’s lifetime. Don’t modify it.
K. Stay images during slideshow. Set the time that elapses between the images during their presentation
in the CASE area (chapter 3.5).
L. Max case name length. Matches the maximum number of characters in the case name - do not change
this.