Milestone 372700, Operator'S Manual

Page: 84 / 108

MacroVIEW MM179-001 - Operator Manual
84
6. MAINTENANCE
The procedure described in this chapter must be performed on a daily basis.
For reasons of safety, any operation without the required personal protection equipment
is to be avoided.
MacroVIEW decontamination is mandatory due to the biohazard, in view of the use of
fresh specimens.
Switch off the instrument if it not used for a long period of time.
6.1. Safety precautions
The personnel involved in the decontamination procedure of MacroVIEW and its optional parts (if present)
must wear appropriate personal protective equipment, in particular:
• Disposable HI-RISK protective gloves (100% latex or equivalent material). Personal protection device
compliant with the EN 374 standard and the 89/686/EEC Directive.
• Antibacterial mask for surgical/operating theatre use and white coat. Personal protection device compliant
with the EN 149 standard Grade FFP3D and the 89/686/EEC Directive.
6.2. Cleaning MacroVIEW
• Turn the camera off.
• Turn off the PC.
• Turn off the system from the ON/OFF button, as described in chapter 3.8.
• Unplug the power supply cable from the main socket.
• Disconnect all the optional parts, if present (keyboard, barcode reader).
Cleaning operations must be performed regularly.
Follow the instructions below;
Do not immerse or rinse the PC or its peripherals.
If you accidentally spill liquid on the device, disconnect the unit from the power source.
Contact your clinical engineering service in relation to the safety of the unit before placing
it back in operation.
Do not autoclave or clean the PC Panel or its peripherals or the camera with strong
aromatic, chlorinated, ketone, ethers or esther solvents (like ethyl acetate or methyl
palmitate), sharp tools or abrasives.
Never immerse electrical connectors in water or other liquids.