Milestone 372700, Operator'S Manual

Page: 59 / 108

MacroVIEW MM179-001 - Operator Manual
59
3.8. Check the battery status
There is a small panel at the front of the unit that allows you to turn the trolley on and off and to show
information relating to the battery.
Below is the image and detailed explanation of the panel.
Description of the parts:
A. ON/OFF button to turn the system ON/OFF.
B. This LED lights up when the battery is powering the system.
C. Four LEDs that indicate the level of charge of the system.
D. Contact customer support if this LED lights up red or yellow when the battery is not down (the charge is
above 15% - see point E).
E. When the battery charge drops below 15%, it beeps once per second; when the battery charge drops
below 5%, it beeps twice per second. You can silence the beeper by pressing this button.
F. Contact customer support if this LED lights up red or yellow when the battery is not down (the charge is
above 15% - see point E).
In particular, with regard to the four LEDs that indicate the level of charge of the system (C), refer to the
following table, which shows when they are ON and their colour according to the level of charge of the
battery when the system is not connected to the power supply (battery discharge).
BATTERY % LED 1 LED 2 LED 3 LED 4 BEEPER NOTES
76%-100% OFF
51%-75% OFF OFF
26%-50% OFF OFF OFF
11-25% OFF OFF OFF OFF
Low battery indication OFF OFF OFF ON Battery % < 15%*
Critical battery level OFF OFF OFF ON Battery % < 5%
*Call customer support if you want to change this value.
A
B
C
D
E
F