Milestone 372700, Operator'S Manual

Page: 41 / 108

MacroVIEW MM179-001 - Operator Manual
41
3.6. LIVE functions
In LIVE it is possible to create/retrieve a case, acquire images, take a video or audio and edit camera
settings.
To extend the life of the camera, a standby is set by default after 3600 seconds (see “Settings” manual,
chapter 3.9.10). When MacroVIEW remains idle for 1 hour, the camera switches off and the live screen turns
black. If you want to switch on the camera, press its icon, as shown below.
3.6.1. Create/retrieve a case
Enter the case’s identifier by barcode reader or manually with keyboard to create or retrieve a case.
When a case code is entered manually, press the enter key .
3.6.2. Save Image/Video/Audio
To save the image of the sample, use the zoom level that allows you to view the desired area,
then press the capture icon or the Save button on the manipulator.
You can press the following two buttons to adjust the height of the stand. For example, the framed area at
maximum height (stand and manipulator raised to the maximum): 2630 mm (103.5”)) is: 180X100 cm
considering a height of 90 cm.