Micsig Smart Series User Manual Download Page 288

Page: 288 / 354

274

Network

Tap “Network” to open the application list.

Tap app icon to view details such as version number of the current app and app description, and tap the green open

option below to open or install the current app.

Tap the green option on the right of the app list to open and install the app.

Local

Apps that have been downloaded and installed are displayed locally. When there is no downloaded application

installation package file locally, the interface will display “There are no available apk files in the local directory”.

U-disk

The U disk interface will display applications that can be opened in the USB disk.

If the USB disk is not plugged, the interface displays “U-disk not inserted”.

Summary of Contents for Smart Series



































































































































































































































































































































































Search results

Summary of Contents for Smart Series

Reviews:

Related manuals for Smart Series

Brands by name

Popular brands

Micsig Smart Series, User Manual

Search results

Summary of Contents for Smart Series

Reviews:

Related manuals for Smart Series

Brands by name

Popular brands