Micsig Smart Series User Manual Download Page 299

Page: 299 / 354

Chapter 13 Homepage Functions

285

If USB device is not plugged, installed and formatted SD cards under USB device are displayed in gray.

If USB device is plugged, it will display the total storage capacity and available memory size, and can also uninstall

and format SD card.

Application

Go to

Settings->App

, manage the equipment apps and change settings. You may view application usage

information, change notification or permission settings, or uninstall unnecessary applications, or set default

application.

Download: shows the downloaded app.

Running: displays the equipment memory and application memory usage.

All: displays the list of all applications.

Language and input method

Tap the language and input method icons to set your system language and input method.

Summary of Contents for Smart Series



































































































































































































































































































































































Search results

Summary of Contents for Smart Series

Reviews:

Related manuals for Smart Series

Brands by name

Popular brands

Micsig Smart Series, User Manual

Search results

Summary of Contents for Smart Series

Reviews:

Related manuals for Smart Series

Brands by name

Popular brands