Micsig ATO1000 Series, User Manual

Page: 214 / 219

Annex
211
Dimension (h * w * d) 250mm*200mm*55mm
Oscilloscope (mainbody) 1040g 1125g
Oscilloscope specifications
Sampling rate range
single channel 1GSa/s
Double channel 500Msa/S
Three / four channels 250Msa/S
Recording length
single channel 28/14m, double channel 14/7m,
three/four channe l7/3.5m
Bandwidth limit 100MHz, low pass filter
Sampling normal, peak,
Probe compensation frequency,
typical
1KHz ， square wave
Input
Input coupling DC, AC,
Input impedance 1m Ω± 1% in parallel with 14.5pf ± 3pf
Probe attenuation coefficient 1mx ~ 10kx in steps of 1 ~ 2 ~ 5
Differential delay, typical
< 40 PS between any two channels with the same
scale and coupling
Horizantal
Position range -14grids~14ks
Scanning range
（
s/div
）
2ns/div
～
1ks/div
Time base accuracy, typical
±20ppm
Vertical
Vertical zoom range
（
V/div
）
1mV/div
～
10V/div in steps of 1~2~5
Position range ±6 grids
Vertical resolution 8 bits
Rise time, typical
70MHz≤5ns
100MHz≤3.5ns
DC gain accuracy, typical ≤±2.0%
Trigger
Trigger sources CH1
、
CH2
、
CH3
、
CH4
Trigger mode auto, normal, single
T
rigger
type
edge rising edge, falling edge and double edge
Pulse width
condition: less than, greater than, equal to, not equal
to
Polarity: positive, negative
Logical trigger AND
、
OR
、
NAND
、
NOR
N edge rising edge, falling edge
Runt polarity: positive, negative, arbitrary