146
10.6 Run/Stop and Single SEQ
Tap
in the right function area to quickly freeze and capture the current signal waveform, tap again, and
the waveform will continue to run; Tap
to conduct single acquisition, and the oscilloscope will display
the single acquisition waveform.
For details, please refer to “
11.2 Run/Stop and Single SEQ Buttons
” in Chapter 11.
10.7 Auto
Use
on the right function key area to turn on the Auto set function. Each time you tap "Auto", the
oscilloscope can recognize the type of input signal and adjust the control mode, It automatically adjusts the vertical
scale, horizontal scale and trigger setting, and adjust the waveform to the best display state.
For details, please refer to “
2.10 Use Auto
” in Chapter 2.
10.8 Measurement
Tap
in the right function area to open or close the automatic measurement menu.
For details, please refer to “
7.1 Automatic Measurement
” in Chapter 7.
10.9 Trigger
Tap
in the right function area to quickly open or close the trigger menu.
For details, please refer to
Chapter 5 Trigger System
.
10.10 Home
Tap
in the right function area, switch to the oscilloscope homepage.
For details, please refer to
Chapter 12 Homepage Functions
.
Summary of Contents for ATO1000 Series
