Chapter 7 Analysis System
121
All measurements
Slide from bottom, open the
pull-up menu
, see Figure 7-2, click
to open all measurement items, display
the current channel measurement value. Switch the current channel to open all the measurement items of other
channels, as shown in Figure 7-3; click again to turn off all measurements.
Figure 7-2 Pull-up Menu
Figure 7-3 All Measurements
Period
Time of the first complete signal cycle in the waveform
Frequency
Reciprocal to the cycle time
Rise time
Time required for the first rising edge of the waveform to rise from the amplitude of 10% to 90%
Fall time
Time required for the first falling edge of the waveform to rise from the amplitude of 10% to 90%
Delay
Summary of Contents for ATO1000 Series
