142
If there are already files loaded into the reference channel, tap
to open the reference channel of all loaded
reference files; tap
to close all currently opened reference waveforms. A single reference channel may also
be opened with the Open/Close button.
Figure 9-6 Restore Reference Waveform
Close the reference waveform:
1)
In the reference menu, tap “Open/Close” button in R1 to close the reference waveform.
2)
Repeat step 1 to close other reference channels. When all reference waveform channels are closed, the reference
waveform channel icon
becomes gray.
3)
Tap
to turn off all reference waveforms.
Reference waveform movement and time base adjustment
The horizontal or vertical movement and zoom of reference waveforms are independent of analog channels, and the
adjustments among different reference waveform channels are also independent of each other.
To adjust the reference waveform of a channel, first set the channel as the current channel, and then adjust the
reference waveform by move or zoom (in accordance with the analog channel method).
The scale and time base of the current channel reference waveform are displayed on the reference button. After
switching the current reference channel, the scale and time base on the reference button change with the change of
current reference channel.
Summary of Contents for ATO1000 Series
