178
13.3 CAN Bus Trigger and Decode
For correctly decoding CAN bus data and making trigger stable, the bus configuration, trigger mode set and
trigger level need to be adjusted.
⚫
Bus configuration
Tap
or
to open the bus configuration menu, the signal source needs to be set, and the signal
type and baud rate are set according to measured signal; the setting method is the same as that of UART and
will not be repeated here. See Figure 13-14:
Figure 13-14 CAN Bus Configuration Menu
⚫
Trigger mode
Open the trigger configuration menu and select the appropriate trigger type; when S1 CAN bus trigger is
selected, as shown in Figure 13-15:
Figure 13-15 CAN Trigger Mode Configuration Menu
Summary of Contents for ATO1000 Series
