Chapter 6 Trigger System
113
Figure 6-24 Runt Trigger Setting Menu
6.7 Slope Trigger
Slope Trigger
means trigger when the waveform reaches a set time condition from one level to another.
Positive slope time: Time takes for the waveform to go from low to high.
Negative slope time: Time takes for the waveform to go from high to low.
As shown in Figure 6-25
Figure 6-25 Positive/Negative Slope Time
When the trigger signal slope has the hold time (8ns~10s), the trigger type on the top of the screen is only the icon
, and trigger happens when the set condition is reached. Slope trigger is suitable for observing sawtooth or
triangular waves. The slope trigger menu descriptions are shown in the table below:
Trigger
Option
Setting
Description
Trigger
Source
CH1
Set CH1 as trigger signal source
CH2
Set CH2 as trigger signal source
High Level
Low Level
Positive Slope Time
Negative Slope Time
Summary of Contents for ATO1000 Series
