manualshive.com logo in svg

Micsig ATO1000 Series, User Manual

The Micsig ATO1000 Series is a cutting-edge electronic device designed to deliver precise measurements and accurate analysis. Simplify your troubleshooting processes with the comprehensive user manual, available for download free of charge from manualshive.com. Master every feature and maximize the potential of your ATO1000 effortlessly.

Share
Download
background image

Chapter 12 Homepage Functions

 

 

   

157 

12.4 Settings 

Tap 

   in  the  homepage  to  enter  the  system  setting  interface.  The  setting  interface  includes  brightness, 

SOUNDS, language, shutdown time, USB, LAN, WLAN, WLAN AP, upgrade and INFORMATION. 
The system setting interface is shown in Figure 12-3. 

 

Figure 12-3 System setting interface 

Brightness 

Brightness adjustment method: adjust the brightness of the screen display, drag the "Brightness" display bar, and 
the screen brightness will change accordingly. 

Sounds 

Volume adjustment method: adjust the volume of the prompt tone, drag the "volume" display bar, and the soft key 
and power on music sound will change accordingly. 

Language 

The oscilloscope supports multi language display, including simplified Chinese and English. 

Shutdown time 

Tap the shutdown time display bar to set the shutdown time. If there is no operation within the set shutdown time, 
the oscilloscope will automatically shut down. If the oscilloscope is operated within the shutdown time, the system 
will start to calculate the shutdown time again, and will not shut down automatically until the requirements are met. 
Adjustment range of standby time: invalid, 1-60min. 

USB 

When the USB cable is used to connect the oscilloscope and PC for the first time, the PC will pop up the prompt of 
installing the driver. Only after the driver is installed correctly can the oscilloscope exchange information with the 
computer. After installing the driver, modify the USB connection mode to achieve different effects: 
1) USB connection: after the USB connection is selected, the host computer software can be used to update the 
oscilloscope program and write the oscilloscope information. 
2) USB storage device: the oscilloscope can be used as a USB storage device. After connecting with the computer, 

Summary of Contents for ATO1000 Series




























































































































































































































Reviews:

No comments

Related manuals for ATO1000 Series

Panasonic WJHD309 - DIGITAL DISK RECORDER Conversion Manualline preview
WJHD309 - DIGITAL DISK RECORDER
Brand: Panasonic Pages: 7
Panasonic WJ-ND300 Administrator Console Network Setup Manual preview
WJ-ND300 Administrator Console
Brand: Panasonic Pages: 24
Olsen Infinity Operation Manual preview
Infinity
Brand: Olsen Pages: 56
Waterous K Series Operation And Maintenance Instruction preview
K Series
Brand: Waterous Pages: 5
3TECH TS-12 Manual preview
TS-12
Brand: 3TECH Pages: 32
4EVAC Compact 500 Operation Manual preview
Compact 500
Brand: 4EVAC Pages: 15
Bacharach Fyrite Tech 50 Operating And Maintenance Instructions Manual preview
Fyrite Tech 50
Brand: Bacharach Pages: 48
Datalogic Heron HD3430 Quick Reference Manual preview
Heron HD3430
Brand: Datalogic Pages: 48
PageFlip Firefly Quick Start Manual preview
Firefly
Brand: PageFlip Pages: 32
Garmin GPSMAP 188 Sounder Owner'S Manual And Reference Manual preview
GPSMAP 188 Sounder
Brand: Garmin Pages: 134
Macht Dental POWER CLEAN Operation Instruction Manual preview
POWER CLEAN
Brand: Macht Dental Pages: 8
PASCO ME-9430 Instruction Manual And Experiment Manual preview
ME-9430
Brand: PASCO Pages: 30
TC Electronic Konnekt 24D User Manual preview
Konnekt 24D
Brand: TC Electronic Pages: 67
Tascam SS-CDR1 Technical Documentation preview
SS-CDR1
Brand: Tascam Pages: 3
V.ORLANDI RP10 Installation, Operating And Maintenance Instructions preview
RP10
Brand: V.ORLANDI Pages: 144
Yamaha TG500 Supplementary Manual preview
TG500
Brand: Yamaha Pages: 16
ubicquia ubigrid DTM+ Installation Manual preview
ubigrid DTM+
Brand: ubicquia Pages: 36
Allen-Bradley DeviceNet CompactPCI 1784-CPCIDS Installation Instructions Manual preview
DeviceNet CompactPCI 1784-CPCIDS
Brand: Allen-Bradley Pages: 36

Brands by name

Popular brands

Load more brands