Installer Manual
Microvideo srl
www.microvideo.eu
38
CHAPTER 3 – Installing
1. Make sure sure the system is disarmed
2. Press simultaneously the 4 and 6 keys on the numeric keypad
3. Press the
key to delete the current address of the keyboard and enter the new
address on the numeric keypad
4. Press
to confirm the change
After changing the keyboard automatically loads its parameters.
Addressing Expansion Module
The expansion modules must be configured through dip switches on the PCB
Addressing GSM / GPRS Module
The dip-switches present in the GSM /
GPRS Module must be left in the default
state
while it is ESSENTIAL to properly configure the GSM bus parameter in the following menu
available on the keyboard:
indicating whether the module is on the Inside bus or on the Outside bus
INTERNAL BUS:
The module is installed inside the Control Panel
Metal Box and connected to Control Panel through
10-pin FLAT cable as in picture
OK
Menu Install
16)Communication
Communication
GSM
OK
GSM
GSM Bus
Summary of Contents for Synergy SY800
Page 1: ...1 ...
Page 60: ...Installer Manual Microvideo srl www microvideo eu 60 ...
