Installer Manual
Microvideo srl
www.microvideo.eu
24
CHAPTER 3 – Installing
Connecting a device with additional
power up to 13.8 V
Connecting siren to an output
Synergy Control Panel has 3 relay and 2 open collector outputs on board, besides each
expansion module adds a relay and three open collector outputs, all configurable by the
installer
Example of connecting relay outputs
The example below shows the typical connection of relay outputs to feed system sirens
Sample connection of open collector outputs
Le uscite open collector presenti sia in centrale che sui moduli di espansione sono in
grado di pilotare correnti sino a 50mA e vengono liberamente configurate dall'operatore;
Questo tipo di uscite consente la chiusura(se NO) o apertura(se NC) a massa del carico
ad esse collegato; di seguito sono riportati due esempi di collegamento con o senza
supplemento di alimentazione:
The open collector outputs, present both on the Control Panel and on expansion modules,
can drive currents up to 50mA and are freely set by the operator; This type of outputs
allows closure (if NO) or opening (if NC) to the mass of the charge attached to them, but
here are two examples of connecting with or without extra power:
Classical Connecting to OC output
of a generic 13,8 V charge
Summary of Contents for Synergy SY800
Page 1: ...1 ...
Page 60: ...Installer Manual Microvideo srl www microvideo eu 60 ...
