Microtech Xstreamjet, Manual

Page: 23 / 45

- 17 -
Setting Up the Xstreamjet
Proceed to the section 5. Cabling the Xstreamjet below.
Cabling the Xstreamjet
Cabling the Xstreamjet consists of making connections with three cables provided
with the unit:
Printer control cable • (mini-din connector, direct to host system)
Printer data cable • (USB connector, direct to host system)
Power cord • (to standard grounded outlet)
The connections made to each type of host are described separately below.
Connecting Cables to the Xstreamjet
Follow these steps to connect the cables to the printer.
Connect USB data cable ( 1.
a
) to port marked
USB
on back of printer.
Connect mini-din printer control cable ( 2. b ) to port marked Printer Control on
back of printer.
Connect power cord ( 3.
c
) to input port next to toggle switch on back of printer.
Figure 15
Final mounting position
Figure 16
Xstreamjet cable connections
a
b c
Connect the cables to the printer as
described in this section no matter
which host system you have.
Xstreamjet Cables