Microtech Xstreamjet, Manual

Page: 21 / 45

- 15 -
Setting Up the Xstreamjet
Lower the printer onto the plate aligning the pins in the plate to the holes in the 6.
bottom of the printer. Slide the printer onto the pins so that it sits flat on the
plate.
Proceed to the section 7.
Cabling the Xstreamjet
below.
Xpress XL Installation
Follow the steps below to install an Xstreamjet printer onto an Xpress XL system from
Microtech Systems.
Unpack the mounting plate. 1.
Align the screw heads on the bottom of the mounting plate with the holes near the 2.
front of the top drive enclosure.
Figure 10
XE / XP thumb screws
Figure 11
Final mounting position
Figure 12
XL mounting plate