26
2.5 Enable mode
In order to manage the Managed Switch and set up required switching functions, enter the
enable
command after the
“Console>” and then press ? for a list of commands available for
use.
Command
Description
backup
Backup configuration file via FTP or TFTP.
cfm
Run OAM 802.1ag CFM loopback, linktrace, delay measurement test.
configure
Enter Config mode.
console
Set up time-out time.
disable
Exit Enable mode and return to User Mode.
exit
Exit Enable mode and return to User Mode.
help
Display a list of available commands in Enable mode.
history
Show commands that have been used.
ip
Assign IP addresses manually or automatically.
logout
Logout from the Managed Switch.
ping
Allow users to ping a specified network device.
reboot
Restart the Managed Switch.
restore
Restore configuration via FTP or TFTP.
service
Three different management services are provided to configure the Managed
Switch; these are
“Telnet”, “SNMP”, and “Web”.
syslog
Configure the Managed Switch
‟s syslog settings.
system
Configure system information.
time-server
Synchronize the time of a computer client or server to another server.
upgrade
Allow users to update firmware and restore configuration via FTP or TFTP.
user
Set up a user account and its access privilege.
Show
Show a list of commands or show the current setting of each listed command.
2.5.1 Backup command mode
Prompt
Command & Parameter
Description
Console(backup)#
auto-backup <ftp | tftp><server
ip> <username> <password>
<file directory> <0-23 o'clock>
To configure auto-backup settings. The
system will backup configuration file.
auto-backup <enable | disable>
To enable or disable auto-backup function.
config <ftp | tftp> <server ip>
<username> <password>
<file directory>
To backup configuration file immediately.
