144
7. 802.1X Monitor:
View port status and Statistics.
8. IGMP Monitor:
View-only field that shows IGMP status and Groups table.
9. Mac Address Table:
List current MAC address learned by the Managed Switch.
10. SFP Information:
View the current port
‟s SFP information, e.g. speed, Vendor ID,
Vendor S/N, etc. SFP port state shows current DMI (Diagnostic monitoring interface)
temperature, voltage, TX Bias, etc.
11. DHCP Snooping:
View the DHCP learn table, etc.
12. CFM Information:
View the current port
‟s CFM information, e.g. CFM stack, CFM
statistics, Maintenance End Point, Remote Maintenance End Points, Linktrace Reply.
4.5.1 Switch Port State
In order to view the real-time port status of the Managed Switch, select
Switch Port State
from the
Switch Monitor
menu and then the following screen page appears.
Port Number:
The number of the port.
Media Type:
The media type of the port, either TX or Fiber.
Port Sate:
This s
hows each port‟s state which can be
D
(Disabled),
B/L
(Blocking/Listening),
L
(Learning) or
F
(Forwarding).
Disabled:
A Port in this state does not participate in frame relay or the operation of the
Spanning Tree Algorithm and Protocol if any.